How To Install A Chandelier To A Dimmer How Do You Install The Dimmer Wires To A Chandelier?

How do you install the dimmer wires to a chandelier? - how to install a chandelier to a dimmer

I havent played the work previousley dimmer. I replaced the Chandalier in the dining room. I have a black wire, white wire and red wire. I assume that black and white = red = positive = dimmer means .....

I tried several ways to connect, but without success. The light is turned on and off does not, even if the controller switches ....

Please help me ?!?!?!

3 comments:

Wally said...

If you have not touched the voltage regulator, then the problem must
to light. Electricians are not the same things when driving with lights. The red wire is rarely circuits.The 120V White
Wire should always be neutral. You need a circuit tester. With
Variable voltage switch-off test between red and white
Black-white son. The (black or red) indicates the voltage is the constant heat. The others should change the cable. You can verify this by the ignition and check continuity or
Zero resistance. You can also go for cover and watch the
see that the son of color to certain circuits are connected to almost thread
Can be hot. The black or white cable can be connected to the network Tor send the power switch with another power cord to send. The power cable is the cable that sends you need to be in
Lights black wire. There must be a white wire is neutral for the circuit. Spiders white wire should be connected, be
to. Good luck I hope this helps.

Evil Independent said...

There are positives and negatives about the area. In the United States, black and red are usually hot and white is neutral. The son of the soil copper are green or bare. Would be in consideration, I have described, I'd say from the voltage regulator and to see that the cables are connected. Do not remove the cable, only to the assigned colors to. Probably the track before you cut electric field. If the son is in black and white, then plug the son of the lamp, as if the son is red and white.

kravdraa said...

Oh, come on!
First.
Is there a second switch that on and off the lights?
If you're a 3-way switch / circuit.
See 3 dedicated circuits in the network, follow the instructions.

Post a Comment